Operating Instructions - Titan TTB599BNS Original Instructions Manual

GB TTB599BNS by TITAN
IE
Tool Set Up
TO PREVENT SERIOUS INJURY:
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR
REMOVED.Moving guards must move freely and close instantly.
Cut-off saw mouting
1. Please place the product on a level, horizontal bench or work table.
2. If desired, mount the product to a piece of 3mm or thicker plywood.
13
Read the ENTIRE IMPORTANT SAFETY INFORMATION
section at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
WARNING!
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Release the Trigger and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning
procedures.
WARNING! Make sure that the mounting surface is not warped
as an uneven surface can cause binding and inaccurate sawing!

Operating instructions