Atlona CP-253 Operation Manual

Dvi to vga scaler box

Advertisement

Quick Links

DVI to VGA
Scaler Box
Atlona CP-253
Operation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CP-253 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atlona CP-253

  • Page 1 DVI to VGA Scaler Box Atlona CP-253 Operation Manual...
  • Page 3 1. Atlona CP-253 is a high performance PC/HDTV two-way scaler that accepts Digital DVI-D input and converts to Analog RGB output. 2. The input to the CP-253 is digital PC or HDTV signal in the format of either RGBHV or YPbPr/YCbCr data bitstream via 24-pin DVI connector.
  • Page 4 4. Installation 4.1 Input Connection The CP-253 can accept both PC and HDTV input in the format of digital DVI. Use the DVI-to-DVI cable to connect the DVI output of a PC or HDTV deive to the DVI input connector of the CP-253.
  • Page 5 5. Configuration & Operation 5.1 Front and Rear Panel DC 5V DVI INPUT PC/HD OUTPUT 480p MENU 5.2 Manual and Adjustments Pressing the Menu button will bring up the OSD menu controls on the screen as follows: * Input set up * Output set up * Picture Adjust * HV Adjust...
  • Page 6 System information- When it is selected, it shows the current software version and the input/output resolution and their vertical refresh rate on the screen. Auto adjust- When it is selected the CP-253 will automatically adjust all the parameter to the factory preset value. Exit- Select to exit from the current page.
  • Page 7: Specifications

    5. Specifications Digital 70/75 Hz Analog 70/75 Hz Input format: Digital RGBHV, YPbPr or YCbCr Input signal: Digital RGB data bitstream Input connector: 24-pin DVI-D connector Output format: Analog RGBHV, YPbPr Output signal: RGB: 0.7 Vp-p, 75 ohm H/V: 3 to 5 Vp-p TTL Y: 1 Vp-p 75 ohm, Pb/Pr: 0.7 Vp-p 75 ohm Output connector: HD15-pin female Power: 5V 2A center-positive...

Table of Contents