Battery Charger Leds - AT&T MDW 9000 Installation Manual

Battery Charger LEDs

The Handset LED, when lit, indicates that the handset battery pack
is in charge mode (battery pack in handset on battery charger).
The Spare Fast Charge LED, when lit, indicates that a spare
battery pack is in the battery charger's fast charge compartment:
When the Spare Fast
Charge LED...
Is steady red
Is steady orange
Is steady green
Flashes orange
The battery charger will charge both the handset battery pack and the
spare battery pack when they are in their proper receptacles.
Refer to the illustration on page 38 for the location of these LEDs on
the battery charger.
Proper Battery Pack Usage
We recommend that you use the fast charge compartment to charge
the battery pack fully and quickly.
NOTE:
Before you use the MDW 9000 handset for the first time, the
battery pack must be charged.
The following table shows how long reconditioning takes, depending
on how much charge is left in the battery pack when you insert it into
the fast charge compartment:
Battery-Pack Charge State
Low charge (lights BATT
indicator)
Full charge
The battery pack inside the
fast charge compartment is...
being discharged.
being fast-charged.
fully charged.
defective; replace the battery pack.
Discharge Time
0.5 hours
4 hours
Recharge Time
2 hours
2 hours
Total Time
2.5 hours
6 hours
39