AT&T MDW 9000 Installation Manual page 26

Insert the carrier assembly's
7
power cord into the left side of
the carrier assembly.
Place the carrier assembly on
8
its feet towards the back of the
shelf or desk, making sure it is in a
stable position. Be sure the telephone
line cords come out the rear exit slots
in the back of the unit. Arrange the
power cord and telephone line cords
beneath the shelf or desk so no one
can step on them or trip over them.
Insert the other end of the
9
telephone line cords into the
appropriate terminal/station connec-
tors on your communications system
switch/control unit (refer to your
communications system manual for
the proper location).
22