Led Indicators - Argox G Series User Manual

LED Indicators

There are three LED indicators on the front panel, "READY",
"MEDIA" and "RIBBON". These indicators display the operation
status of the printer.
LED
READY The READY indicator will remain lighted except if
any of the following conditions happens
- The printer is at PAUSE status.
- Error condition.
MEDIA The MEDIA indicator will remain on for the normal
operation of the printer.
Blinking – Media is used out.
ON – under thermal transfer mode with ribbon
RIBBON
installed. Bit 1 of DIP switch is at ON position.
OFF – under direct thermal mode. ( no ribbon
installed ) Bit 1 of DIP switch is at OFF position.
Blinking – Ribbon is used out.
Function
29