Normally, if the printer is in not working properly, the "READY" LED
blinks continuously, and printing and communication between the
host and printer stops.
LED and LCD Diagnosis
Blinking LEDs indicate a problem. Check the LEDs and the LCD
display and refer to the following solutions:
Media Problems
LED/LCD
READY and MEDIA LEDs
LCD Display
Possible Problems
Miss-detected gap
Media out
Media not installed
Media jam
Note: If problem continues perform a label sensor calibration.
4. Troubleshooting
Blinking
MEDIA OUT
Solutions
Check the media
path.
Check the position of
the label sensor.
Supply the media roll
Install the media roll
Recover the jam
52
Indication
Remarks
For continuous
media, check
application and
driver, and select
continuous media.