Changing Settings From The Panel - Argox G Series User Manual

Changing Settings from the Panel

You may change settings, by using the buttons on the front panel,
instead of changing settings via software or commands.
Buttons
PAUSE+CANCEL
FEED
PAUSE
CANCEL
Note: Do not change settings during printing or sending printing
data.
Press to enter setting mode.
(Don't press over 1 second)
Press again to exit setting mode and return
to normal mode.
Press to show next parameter.
Press to show next setting item.
Select and save a parameter to permanent
2
memory (E PROM).
The parameter will be kept even if you
restart the printer, until it's changed again by
either panel or commands.
33
Function