Table of Contents
Advertisement
MPH2430.O/M.QXD
1/29/03
TELEPHONE OPERATION (CONTINUED)
STORING NAMES & TELEPHONE NUMBERS IN THE PHONEBOOK
The memory can store up to 40 name/telephone numbers.
1
Press the DIR button while in the
Standby mode.
3
2
4
1
Press the Scroll Down button
enter the telephone number using Key
buttons (0-9,*,#) . You can store up to
22 digits. Briefly press the SAVE/RE/PA
button
to insert a pause.
NOTES:
•
If the data is stored in a location where data has already been stored, the old data
will be overwritten.
•
When storing a telephone number, e.g. 9655588 into the Phonebook, the display
will show 9 655 588. However, the correct format sequence of 965-5588 will display
after it is saved.
•
"MEMORY FULL" will appear in the display when there are no memory locations left.
•
To edit a phone number after it has been typed in already, move through the
number using the Scroll Left or Right button. To delete a character or number inside
the cursor, press the DEL/CHAN button.
9:12 AM
Page 29
See the Character Map Chart on the top of the next
page and using the Key buttons (0-9,*,#) , enter the
name. To move the cursor to the right, create a space
or enter a new letter, press the Scroll Right
1
For example, press the 4 button
then press the Scroll Right
three times to enter the second character, "R". Repeat
this step until all letters have been entered (up to 18).
3
2
and
2
Press the EDIT/FLASH button to
create a new directory entry.
once to enter a "G",
. Press the 7 button
5
Press and hold the SAVE/RE/PA button
to store the number into memory. Press
the DIR button to return to the Standby
mode, or if no buttons are pressed within
20 seconds, the unit will automatically
revert back to the Standby mode.
29
button.
Advertisement
Table of Contents
