Setting The Pbx Number - Memorex MPH2430 Operating Instructions Manual

MPH2430.O/M.QXD 1/29/03
SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE PBX NUMBER

This feature will insert a number (0-9) before the outgoing number, if required.
When a number is selected, the unit will automatically dial the preset PBX number
and a pause before any speed dial or Caller ID callback. Set the PBX number as
follows:
1
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
3
Press the EDIT/FLASH button to
change the setting; the PBX Number
setting will blink.
5
When the desired PBX Number setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
9:12 AM Page 16
2
Press the Scroll Down button
times or the 6 key button
PBX Number setting will appear.
4
Press the Scroll Up
button to select a PBX Number or Off
(to turn the PBX setting Off).
6
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
16
1
2
five
once; the
1
2
or Down