Setting The Pause Time - Memorex MPH2430 Operating Instructions Manual

MPH2430.O/M.QXD 1/29/03

SETTING THE PAUSE TIME

This unit enables you to change the number of seconds that a pause lasts when
using programmed pauses in your speed dial numbers or after your PBX number.
Set the Pause Time as follows:
1
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
3
Press the EDIT/FLASH button to
change the setting; the Pause Time
setting will blink.
5
When the desired Pause Time setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
9:12 AM Page 18
SET-UP INSTRUCTIONS (CONTINUED)
2
1
Press the Scroll Down button
times or the 8 key button
Time setting will appear.
4
1
Press the Scroll Up
button to select the desired Pause
Time.
6
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
18
2
seven
; the Pause
2
or Down