Telephone Operation; Ringer Switch; Tone/Pulse Switch; Placing A Call - Memorex MPH2430 Operating Instructions Manual

MPH2430.O/M.QXD 1/29/03

RINGER SWITCH

1
Slide the RINGER ON/OFF switch on
the side of the base to the ON position
to turn the ringer on. Slide the
RINGER ON/OFF switch to the OFF
position to turn the ringer off.

PLACING A CALL

1
After the battery has been fully charged,
press the TALK button and listen for a
dial tone; the timer will start counting in
the display.
NOTES:
• You can also dial the number first, then press the TALK button. The unit will
then dial the number automatically.
• Do not use this telephone within 20 feet of a microwave that is cooking as you
may experience interference.
9:12 AM Page 22

TELEPHONE OPERATION

TONE/PULSE SWITCH

1
Slide the TONE/PULSE switch on the
side of the base to TONE or PULSE to
match the service provided on your
telephone line. If you are not sure of
your service, please contact your
telephone company.
2
Press the Key buttons (0-9)
the phone number you wish to call.
When finished talking, press the TALK
button
on the base to hang up.
22
2
1
to dial
again or place the handset