Table of Contents
Advertisement
MPH2430.O/M.QXD
1/29/03
ANSWERING MACHINE OPERATION (CONTINUED)
TURNING THE ANSWERING SYSTEM ON/OFF
1
Press the ANS ON/OFF button to turn
the answering system on; the unit will
announce "Answering machine is on"
and the ANS ON/OFF indicator will
light.
NOTE:
•
Once the answering system is turned off, the answer function will answer after
the 10th ring, allowing you to turn the answering system on from a remote
location.
SETTING THE ANNC/ICM SWITCH
1
SET TO ICM:
When this switch is in the ICM position
and the answering system receives a
call, it will play the OGM and record a
message.
9:12 AM
Page 37
2
Press the ANS ON/OFF button again
to turn the answering system off; the
unit will announce "Answering
machine is off" and the ANS ON/OFF
indicator will go off.
2
SET TO ANNC:
When this switch is in the ANNC
position and the answering system
receives a call, it will play the announce-
ment and not record a message ("Ao"
will appear in the Message Display).
Record an announcement by pressing
and holding the OGM button and
recording it after the unit announces,
"Please record your announcement
after the beep". Release the OGM
button when recording is completed.
37
Advertisement
Table of Contents
