Set-Up Instructions; Setting The Ringer Volume - Memorex MPH2430 Operating Instructions Manual

MPH2430.O/M.QXD 1/29/03

SETTING THE RINGER VOLUME

Set the ringer volume (HI, LOW, OFF) while in the Standby mode as follows:
1
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
3
1
Press the Scroll Up
button to select a desired ringer
volume (HI, LOW or OFF).
5
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
9:11 AM Page 11

SET-UP INSTRUCTIONS

2
Press the EDIT/FLASH button to
change the setting; the Ringer Volume
setting will blink.
4
2
or Down When the desired Ringer Volume
setting appears, press and hold the
SAVE/RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
NOTE:
A button must be pressed within 20
seconds, or the unit will revert back to
the Standby mode.
11