Table of Contents
Advertisement
UC374BH(MPH6990) OM ENG
The Answering Machine
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the
following steps:
1
Press
twice.
MENU
"Security code" and the current PIN code is announced as it is displayed on
the base.
2
Press
or
SKIP
3
Press
SET/RINGER
announces "Security code" and the new PIN code.
The PIN code is set to "80" when you purchase the phone.
Note
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears before
your answering system plays the outgoing message. You can set the ring time to
answer after two, four, or six rings. Setting
picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can
hang up after the second ring to avoid billing charges.
1
Press
three times.
MENU
You hear "Ring time" and the current ring time ([
[
] Toll saver), and it is displayed on the base.
2
Press
or
SKIP
3
Press
SET/RINGER
announces "Ring time" and the new ring time.
6/5/02
8:57 AM
until the desired number appears.
REPEAT
to select the PIN code. You hear a tone and the system
until the desired ring time appears.
REPEAT
to select the new ring time. You hear a tone and the system
Page 35
(continued)
(Toll Saver), the answering system
] 2, [
] 4, [
] 6,
35
Advertisement
Table of Contents
