Table of Contents
Advertisement
Introduction
To avoid shock or injury, do not perform the verification tests or calibration
procedures described in the manual unless you are qualified to do so.
The information provided in this document is for the use
The 61-350 serials contain parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES, INC. and its products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
Precautions and Safety Information
Use the Meter only as described in the Service Manual. If you do not do so, the protection provided
by the Meter may be impaired. Read the "Safety Information" page before servicing this product.
In this manual, a Warning identifies conditions and actions that pose hazard (s) to the user; a
Caution identifies conditions and actions that may damage the Meter or the test instruments.
The Symbols
The symbols used on the Meter and in this manual are explained in Table A.
Table A. The Symbols
Form number TM61354
Warning
of qualified personnel only.
Caution
www.idealindustries.com
Risk of electric shock
See instruction card for details
DC measurement
Equipment protected by double or reinforced
insulation
Battery
Earth
AC measurement
Conforms to EU directives
Rev 2 July 2006
Page 1
Advertisement
Table of Contents
