Table of Contents
Advertisement
Introduction
To avoid shock or injury, do not perform the verification tests or calibration
procedures described in this manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
The 61-490 serials contain parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES, INC. and its products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
Precautions and Safety Information
Use the Meter only as described in the Users Manual. If you do not do so, the
protection provided by the Meter may be impaired. Read the "Safety Information"
page before servicing this product. In this manual, a Warning identifies conditions
and actions that pose hazard (s) to the user; a Caution identifies conditions and
actions that may damage the Meter or the test instruments.
The Symbols
The symbols used on the Meter and in this manual are explained in Table A.
Table A. The Symbols
Symbol
Alternating signal
Direct signal
CAT III
IEC overvoltage Category III
Refer to the manual. Important
information.
Take appropriate precautions.
Hazardous voltage may be
present
Form number TM61494-5
Warning
Caution
www.idealindustries.com
Meaning
Symbol
Rev 2 February 2002
Meaning
Battery
Earth ground
Fuse
Double insulated
Page 1
Hide quick links:
Advertisement
Table of Contents
