Table of Contents
Advertisement
Baby Monitoring Phone Function
The baby monitoring phone function allows you to use your
PBX to monitor sounds in the room. A PBX extension must be
located in the room to be monitored. Enter a code to activate
the room monitoring. Lay the handset next to the phone or
activate the speaker phone. The volume level of the phone
can be set to any of eight levels.
It is preferable to use the speaker phone function.
To enable the baby monitoring phone function, proceed as
follows:
N
s4
s
Level
Number
Q
Dial the number of the extension to listen in at an extension
with room monitoring activated.
After initiating a baby monitoring phone call, the PBX cannot
generate a new call until at least one minute has lapsed.
FRITZ!Box Fon – 7 Configuration and Operation by Telephone
Baby Monitoring Phone Function
Pick up the handset or activate the
speaker phone function of your tele-
phone.
r
Dial the sequence shown at left. For
"Level", enter a number between 1
(the most sensitive sound level) and
"8". For "Number", enter the number
to be called. This may be the number
of another internal extension, a "9" for
an internal group call, or any external
number desired.
Wait for the acknowledgement tone.
The baby monitoring phone function is
now enabled.
Do not hang up the handset!
65
Advertisement
Table of Contents
