Operation Keys & Functions; Display - Kolida DL-200 User Manual

1.2 Operation Keys & Functions
key
Power ON/OFF
POW/MEAS
MENU
DIST
↑↓
→← number moving
ENT
ESC
0～9
Mode of setting
－
.

1.3 Display

The display adopts dot matrix LCD, displaying 2 lines, with 16 characters in each.
LCD illumination ON/OFF.
By pressing
instrument parameters.
Setting Contrast
There're 9 degrees for the contrast. Please refer to parameter setting to know how
to set the contrast.
name
measure
menu
distance
measure
select
enter
ESC
number keys
inverse staff
illumination
decimal point
to turn ON or OFF the illumination. It is also available to set it in
Power ON/OFF, and start to measure.
Power ON: press once;
Power OFF: hold on for 2 seconds.
Return to the menu list.
In measurement status, press it to start measure
the distance and display the distance.
Turn the page of menu list or data list.
Turn the left or right page when viewing the
data, or move left or right in inputting status.
To confirm the parameters or inputting data.
To escape from menu mode or any setting
mode. Also to go backspace to delete a
character in inputting mode.
Inputting numbers.
Use for inputting inverse staff. Set the inverse
staff. You should activate this function in
parameter setting first.
Turn ON/OFF the illumination
Inputting a decimal point
9
function