Default Button: press the button that all system value will reset to default.
Figure 2-2. The Rear Panel
Figure 2-2. The Rear Panel
Desktop Installation
Set the Switch on a sufficiently large flat space with a power outlet nearby.
The surface where you put your Switch should be clean, smooth, level and
sturdy. Make sure there is enough clearance around the Switch to allow
attachment of cables, power cord and allow air circulation.
Attaching Rubber Feet
A.
Make sure mounting surface on the bottom of the Switch is grease and
dust free.
B.
Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the Switch.
These footpads can prevent the Switch from shock/vibration.
Rack-mounted Installation
The FSW-1641TX/2441TX ,16/24 10/100Base-TX Web Smart Switch, come
with a rack-mounted kid and can be mounted in an EIA standard size, 19-inch
of FSW-1641TX Web Smart Switch
of FSW-2441TX Web Smart Switch
7