Fsp-10, 11 Programming Instructions - Amana A1200S Service

FSP-10, 11 Programming Instructions

!
Oven is shipped with "change time power pad cover".
Cover change time and power level pads after
programming oven to discourage program tampering.
Pad Number Display—Indicates number pad being used
or programmed.
Change Time Pad—Press to initiate time change
sequence.
Time Display—Indicates time remaining during cooking
cycle. Also displays time being programmed into oven.
Defrost II—Use to initiate defrost operation.
Start—Use to initiate full power cooking (with change time
feature). Also use in full power programming.
Pads 1-10—Preset at 100% power for times below. Can
be changed to accommodate specific menu needs.
Pad Time
1 :10
2 :20
3 :30
4 :40
5 :50
Programming Notes:
1. Read all instructions before programming oven.
2. To clear programming error press 0 pad once. Return
to programming instructions.
3. Cursors flickering in display during programming is
normal.
Full Power Cooking
Heat food up to 39 minutes and 59 seconds.
1. Open oven door.
2. Press pads 6,1,4 to enter programming mode.
3. Close oven door. "PROG" displays indicating
programming mode.
4. Press number pad to be programmed. Pad number,
previously set time, and power level display.
5. Press pad 0 to clear display.
6. Enter required time:
Press pad 1
to change seconds
Press pad 2
to change tens of seconds
Press pad 3
to change minutes
Press pad 4
to change tens of minutes
7. Press START.
8. Press pad 5.
9. Press pads 0,5 to lock program into memory.
10.To reprogram another pad repeat steps 4-9. To exit
programming mode open and close oven door.
RE220002 Rev. 6
WARNING
Pad Time
6 1:00
7 1:15
8 1:30
9 1:45
0 2:00
"00:01"
"00:10"
"01:00"
"10:00"
To avoid risk of electrical shock, personal injury, or death,
disconnect power to unit and discharge the capacitor
before following any disassembly procedures.
Summary of Full Power Cooking
1. Open door.
2. Press 6,1, 4.
3. Close door.
4. Press number to be reprogrammed.
5. Press pad 0.
6. Enter required time.
7. Press START.
8. Press 5.
9. Press 0, 5.
10.Repeat steps 4-9 or open and close door.
Defrosting
Defrost II pad can be set up to 39 minutes and 59
seconds.
1. Follow steps 1-6 in "Full Power Cooking" section.
2. Press Defrost II pad
3. Press numbers 5, 0, 5 to lock program into memory.
4. To program another pad repeat steps 1-3 above.
NOTE: Open and close the oven door to exit
programming mode.
Two-Stage cooking
Combine defrost and full power cooking into a single
pad.
1. Follow steps 1-6 in "Full Power Cooking" section.
2. Press Defrost II pad.
3. Press number 5 to advance to second stage.
4. Follow steps 5-6 in "Full Power Cooking" section to
enter full power cooking time.
5. Press number 5 to lock program into memory.
6. To program another pad repeat steps 1-5 above.
NOTE: Open and close oven door to exit programming
mode.
48