Removing the side cover
Complete the following steps to remove the server side cover:
1. Review the safety information beginning on page vii and the "Installation
2. Turn off the server and all attached devices (see "Turning off the server" on
3. Lay the server on its side.
4. Unlock the side cover; then, pull the cover-release latch away from the server
To replace the side cover, see "Replacing the side cover" on page 38.
Attention:
server. Operating the server for extended periods of time (more than 30 minutes)
with the cover removed might damage server components.
guidelines" on page 13.
page 44); then, disconnect all power cords and external cables.
and push the cover toward the rear of the server. Lift the side cover off the
server and set it aside.
Cover-release
latch
For proper cooling and airflow, replace the cover before turning on the
Key lock
Chapter 2. Installing options
15