Show View Timer Programming - JVC DR-MV1S Instructions Manual

S V Timer Programming
TM
HOW IEW
You can programme this unit to timer-record as many as
8 programmes.
With the S V system, timer programming is greatly
HOW IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
● Make sure that the unit's built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
DVD TIMER (#)
VCR/DVD
CANCEL (X)
SHOWVIEW
ENTER
CLEAR (8)
1
Load a recordable disc.
2
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3
Press SHOWVIEW to access the S
4
Press the number keys to
enter the S V number of a
HOW IEW
programme you wish to record,
then press ENTER.
● If you have made a mistake, press
CANCEL (&) and input the correct
number before you press ENTER.
● To clear all entered numbers at a
time, press CLEAR(8).
● If the number you entered is invalid, "SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY" appears on the TV
screen. Input a valid S
HOW
● If "GUIDE PROGRAMME IS NOT SET SELECT CHANNEL YOU
WANT TO RECORD" appears on the TV screen, set Guide Program
numbers manually. ( pg. 82)
● When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV screen, you need to cancel some
of the reserved programmes. (
5
The S V number you entered and the matching timer-
HOW IEW
recording information are displayed on the TV screen. Check the
programme data.
● To cancel this setting, press SHOWVIEW or RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "S
HOW
the Guide Program number correctly.
V
HOW IEW
SAT
1 2 3
0 – 9
4 5 6
7 8 9
0
RETURN
V screen.
HOW IEW
V number.
IEW
pg. 47)
V TM System Setup" ( pg. 82) and set
IEW
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
● "STOP" (To advance/go back the stop time by 30 minutes, press and
hold rt).
● "DAILY/WEEKLY" (
● "REC MODE" (
● "NAME" (
● "VPS/PDC" (
7
Press ENTER to access the Programme Confirmation screen.
8
Press ENTER to complete timer programming.
● To programme another timer, repeat steps 3 – 8.
● If "PROGRAM OVERLAPPED" appears on the TV screen, see
number.
page 47.
9
Press DVD TIMER (#) to engage the unit's timer mode. The
DVD timer lamp lights up on the unit and the VCR deck is
automatically selected. Press 1 to turn off the unit. When the
VCR deck is in timer standby mode, the unit is automatically turned
off.
● To disengage the timer mode, press DVD TIMER (#) again.
NOTES:
● There may be cases that S
prolongs the stop time of the programming.
● When two successive programmes are recorded on a DVD-RW disc
with S
HOW
second one may be left off the recording.
● S
V
HOW IEW
exclusively for On-Disc Timer Programming.
● If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
programme number has been changed, the wrong programme
number will be displayed on the S
step 5. When this happens, set the correct Guide Program number
for that station. (
Satellite Receiver Users
To timer-record a satellite broadcast using the S
system:
A Perform "Satellite Receiver Control Setting (DVD Deck Only)"
( pg. 21).
B Perform "S
C Leave the satellite receiver's power on.
Daily/Weekly Recording
You can record programmes with one of the following weekly/daily
timer settings.
WEEKLY
: Select to record a weekly programme.
MON–FRI
: Select to record a daily programme from Monday
through Friday.
MON–SAT
: Select to record a daily programme from Monday
through Saturday.
SUN–SAT
: Select to record a daily programme from Sunday
through Saturday.
OPERATIONS ON DVD DECK
pg. 43, "Daily/Weekly Recording")
pg. 40, "Recording Mode")
pg. 59, "Modify Programme Name")
pg. 44, "VPS/PDC Recording")
V Timer Programming function
HOW IEW
V Timer Programming function, the beginning of the
IEW
Timer Programming is not possible on the discs used
V
HOW IEW
pg. 82, "S V TM
HOW IEW
V TM Timer Programming" (
HOW IEW
43
EN
programme screen in
System Setup")
V
HOW IEW
pg. 43).