JVC DR-MV1S Instructions Manual page 93

SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY
● An invalid S
V number has been input. (
HOW IEW
GUIDE PROGRAMME IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
● To set the timer programme using the S
Guide Program number must be set in advance. (
CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR INSTANT TIMER RECORDING,
THEN ENTER THE SHOWVIEW NO. AGAIN
● Appears when you tried to input a S
timer recording or instant timer recording.
REGION CODE ERROR
CHECK DISC
● A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (
UNREADABLE DISC
CHECK DISC
● When an incompatible disc is loaded, 4 has been pressed.
( pg. 7)
COULD NOT FORMAT THE DISC
CHECK THE DISC
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
COULD NOT FINALISE THE DISC
CHECK THE DISC
● Finalising is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
COULD NOT CANCEL DISC FINALISATION
CHECK THE DISC
● Cancelling disc finalisation is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (
87)
PRESS [STOP] AGAIN TO STOP RECORDING
● During Live Memory playback, 8 has been pressed. (
TIMER RECORDING COMPLETED
● Timer recording has finished during Live Memory playback.
PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START
● Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
COPY PROHIBITED
CAN NOT RECORD
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
pg. 43)
V system, the
HOW IEW
pg. 82)
V number during
HOW IEW
pg. 7)
pg. 10, 86)
pg. 10, 87)
pg. 10,
pg. 32)
COPY PROHIBITED
CAN NOT PLAY
● The unit has detected invalid contents at the start or in the
middle of playback.
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND
POWERED ON
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
● Check the connection. (
TROUBLESHOOTING
pg. 69)
93
EN