Preset Download - JVC DR-MV1S Instructions Manual

Dvd video recorder & video cassette recorder
Hide thumbs Also See for DR-MV1S:
Table of Contents

Advertisement

INITIAL SETTINGS
18
EN

Preset Download

Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Program Number Set
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
VCR/DVD
ENTER
SET UP
SAT
1
2
3
4
5
6
8
7
9
0
rtw e
If you have connected the unit to your TV via a 21-pin SCART
cable (
pg. 16), the unit will automatically perform Preset
Download instead of the Auto Set Up in step 4 on page 17. After
downloading, the unit sets the clock and Guide Program numbers
automatically.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Perform steps 1 to 3 of "Auto Set Up" (
1
Press rt to select "T-V LINK" and press ENTER. The T-V
LINK screen will appear, and the unit automatically performs Auto
Channel Set.
● When Auto Channel Set is
completed, "PLEASE WAIT" will
be displayed for about 90 seconds,
since channel data is exchanged
between the DVD deck and the
VHS deck. No operation will be
done during this time.
ATTENTION:
Preset positions on the front display
panel increase from "PR 1"; do NOT
press any button on the unit or
remote control until the front display
panel shows clock time, "PR 1" or
"– –:– –" as illustrated on page 19.
NOTES:
● For details, refer to the instruction
manual of your TV.
● In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock Set
nor Auto Guide Program Number Set.
● If there is a power cut, or if you press 1 or SET UP while
downloading or set up is in progress, it will be interrupted; be sure to
turn off the unit power once and try again from the beginning.
● Auto Clock Set may not function properly depending on the reception
condition.
● On this unit, the characters available for station names (ID) are A–Z,
0–9, –,
, + and
(space). Some names of downloaded stations
f
I
may differ from those of your TV. (
After "Preset Download" is completed, perform "Monitor Set
(DVD Deck Only)" on page 23.
pg. 17) before continuing.
pg. 84)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-mv1b

Table of Contents