Basic Specification; Acquisition Time; Receiver Accuracy; Use Limitation - Holux M-1000 User Manual

HOLUX M-1000 Bluetooth GPS Receiver Manual

4.1. Basic Specification

4.2. Acquisition Time (refer to MTK chip specification)

4.3. Receiver Accuracy

4.4. Use Limitation

4.5. Power Supply

4.6. Output and Interface

This Manual: http://www.manuallib.com/file/2551106
Chipset：MTK MT3318
Channels： 32 parallel satellite-tracking channels.
Frequency： 1575.42 MHz
Receiver： L1, C/A code.
Reacquisition： 0.1 second.
Cold start： < 36 seconds.
Warm start：< 33 seconds .
Hot start： < 1 second
Normal： < 3 meters CEP without SA.
Enable EGNOS or WAAS：
Position: < 2.2 meters, horizontal 95% of time
< 5 meters, Vertical 95% of time
Velocity： within 0.1 meters / second
Time： 0.1 microsecond synchronized GPS time
Altitude： < 18,000 meters (60,000 feet)
Velocity: ：< 515 meters/ second (1000Knots)
Acceleration： 4 G.
Jerk： 20 meters / second
External Voltage: 5V DC +/-5%
Batteries：
Main Power: Built-in rechargeable Lithium-ion for system power.
Working voltage: 40~50mA (Normal mode).
35mA (Power Saving).
Auto Power Saving mode.
Circuit protection on M-1000 when over-temperature condition 50℃ occurs.
Output
I. Output protocol
Baud Rate： 38400 bps
Data bit： 8
Parity： No
.
chipset
3
, max
6