17.3
Remote Control Button
17.3.1
SET Button
To check remote control transmission code and store the transmission code to EEPROM
Press "Set" button continuously for 10 seconds by using pointer
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
17.3.2
RESET (RC)
To clear and restore the remote control setting to factory default.
Press once to clear the memory
o
17.3.3
RESET (AC)
To restore the unit's setting to factory default.
Press once to restore the unit's setting
o
17.3.4
TIMER ▲
To change indoor unit indicator's LED intensity:
Press continuously for 5 seconds.
o
17.3.5
TIMER ▼
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds.
o
17.3.6
CLOCK Button
To change the remote control time format:
Press for more than 5 seconds
o
72