Maintenance mode
Maintenance mode
Activity
Enter the maintenance mode.
Recommendation
• For setting the U-Parameter
• To print special reports (Eventlog)
• To print test charts for adjustments
• To adjust and calibrate the machine
• To adjust and calibrate the machine
Requirement
• Knowledge of how to use the maintenance mode.
• Knowledge about the functions of the U-Parameter.
Tip
The maintenance mode is not for user!
Starting the maintenance mode:
Variant 1:
Variant 2:
Take variant 2 if variant 1 doesn't work.
For example if the accounting is active.
I
In special cases like C-code you have to open and close the front cover after
i l
entering 10871087.
Navigation in maintenance mode:
Entries:
Confirm:
Return:
Quit the maintenance mode:
With the numeric keys by 001 and confirm with START key
In copy mode
1087 1087
Button Status/Print cancel
lik C
d
h
t
numeric keys or < > key
START- or OK-key
Return- or Stop- key
LE 04 Maintenance
LE 04 Maintenance
1087 1087
d l
th f
t
ft