Kyocera FS-6025MFP User Manual page 47

Design of the Command Center
The Command Center is divided into the following areas:
1. Main Menu
Access to the main functions of the Command Center.
If no login for the Command Center takes place, the "Start" menu appears.
2. Submenu
The contents depend on which item was chosen in the main menu.
If there is a ► after the menu item, more submenus are located there. By moving the mouse over it,
these become visible.
Each submenu is colored differently for better differentiation.
A different color is used for each submenu for better differentiation.
3. Information/setup area
The contents can be scrolled over with the right scroll bar if the setup areas are particularly extensive.
Important Note:
• If the Command Center has not been accessed for a long time, a new password has to be entered.
• It is advisable to change the access password after the first use (see page 88).
• If the password has been forgotten, there is NO way to access the Command Center. When this happens,
the
device has to be reset to the factory settings by taking the relevant measures. In this case, all individual
settings
are lost.
(Also see Command Center, "Helpful hints")
y g y g
LE 05 Command Center LE 05 Command Center