Maintenance Mode - Kyocera FS-9120DN Service Manual

1-4-2 Maintenance mode

(1) Maintenance mode
The printer is equipped with a maintenance function which can be used to maintain and service the machine.
To run the maintenance mode, Insert a compact flash card to which the API program has been written into the printer
and load the API program to the printer using either method.
* Turn off and on the printer. The API program will be automatically loaded into the printer.
* Load the API program with read program.
* Enter the MENU mode and display the [>>Read Program Maintenance API] in the [Memory Card>], then press the ENTER
key.
The maintenance mode can be executed from the MENU mode.
If the compact flash card is removed from the printer and then the printer is turned off and on, the API program will be
deleted from the printer and the maintenance mode will be deleted from the MENU mode.
When a service call occurs, the maintenance mode cannot be started. Start the maintenance mode after clearing the ser-
vice call.
(2) Executing a maintenance item
Message display
Ready
––– A4 PLAIN
1 Press the MENU key.
Print
Menu Map
Maintenance
Mode
[##] indicates the version of
the maintenance mode.
2 Press the or key several times
until [Maintenance >] is displayed.
> Maintenance
[##]
3 Press the ENTER key.
>Default Data
[U002] Set
3 Press the key.
>Print Without
[U005] Paper ###
>Drive Motor
[U030]
>Check Switches>
[U031]
>Check Cluches >
[U032]
>Set Folio Size
[U035]
Continued to the next page
>
Mode [##] ?
4 Press the ENTER key.
>
######
FS-9120DN/9520DN
The test page is printed.
Initializing data for engine controller
See page 1-4-12.
Printing without paper
See page 1-4-12.
Checking motor operation
See page 1-4-12.
Checking switches for paper conveying
See page 1-4-13.
Checking clutch operation
See page 1-4-13.
Setting folio size
See page 1-4-14.
1-4-9