Kyocera FS-6025MFP User Manual page 54

LE 05 Command Center LE 05 Command Center
Blocking the Interfaces Blocking the Interfaces
Action
Recommendations
Pre-conditions
Notes
Targeted blocking of the device's interfaces.
• If unauthorized use of the device is to be prevented (e.g. to print holiday photos).
• If arbitrary firmware updates are to be prevented (e.g. USB host).
• Part of a security concept.
Administrative access to the Command Center.
• After setup, the device has to be switched off briefly so that the status can be
activated.
Alternatively, a restart can be carried out via the Command Center.
If a fax system is integrated in the system, this is done by blocking the "Opt.
interface 1" causes it to be switched off.
As the interface status is changed only after the device is switched on again, the As the interface stat s is changed onl after the de ice is s itched on again the
causal link might be lost.