Kyocera FS-6025MFP User Manual page 69

Scanning, Scan-to-SMB S i S
Action
Recommendations
Pre-conditions
Notes
Summary
• The SMB protocol must be switched on • The SMB protocol must be switched on.
• The port adresses can be edited as needed.
• Check by means of a PC that the relevant rights have been assigned to the services that will receive the scans.
Transfer the required information (account, password etc.) to the address book.
• If the computer receiving the scan is part of a domain, then the user entry for the scanner has to be the
corresponding domain name. The login user name is (for example):
• The firewall settings may have to be modified, if this is required ("file and printer sharing").
t SMB
Scan to Windows Services (e.g. in folder)
If there is a requirement for sending scanned objects To Windows Services
• Administrative access to the Command Center.
• Services can be accessed via the network.
Though SMB address entries can be made via the operation panel, it is
recommended that target addresses for this device are stored.
This can be done via the address books or by using the one touch keys.
<domain user name>@domain.local.
LE 05 Command Center LE 05 Command Center