Kyocera FS-6025MFP User Manual page 9

I Installation t ll ti
(continuation)
The scanner locking is needed for the transport of the
machine.
If you didn't unlock, the display shows call service (C3100). In
this case, switch off the machine unlock the lever and switch
on the machine.
By every transport you have to use this securing device. By every transport you have to use this securing device
In maintenance mode U002 the scanner move's to the
transport position and you can lock the scanner.
The lever is also protected. For transport securing push the
small hook and then insert the lever.
After switching on the machine the developers fill up mode start's
automatically for round about 5 minutes.
In this time you can make the most important machine settings
via the install wizard.
After setting the language you can set date and time, also the
network settings and the settings for the optional fax system.
After installing the DF-470 it's not possible to insert
Memory card's. y
LE 02 Installation LE 02 Installation