Electrical Requirements; Grounding; Installation Instructions; Window Requirements - GE AMD10 Use And Care & Installation Manual

Hide thumbs Also See for AMD10:
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN
Read these instructions completely and
carefully.
and ordinances.
instructions with the consumer.
CO NSUMER–l(eep these instructions for
future reference.

ELECTRICAL REQUIREMENTS

FOR PERSONAL SAFETY:
THIS APPLIANCE MUST BE PROPERLY
GROUNDED. See grounding instructions.
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD GROUNDING
PRONG FROM THE POWER CORD.
WE RECOMM END THAT YOU DO NOT USE
AN EXTENSION CORD OR AN ADAPTER
PLUG WITH THIS APPLIANCE.
DO NOT CHANGE THE PLUG ON THE
POWER CORD OF THIS APPLIANCE.
FOLLOW NATIONAL ELECTRICAL CODES
OR LOCAL CODES AND ORDINANCES.
20 AMP
15 AMP
circuit
circuit
"parallel" type
"perpendicular"
type
If
the electrical supply provided does not meet
the above specifications, call a licensed electrician.
Aluminum house wiring may pose special
problems–consult a qualified electrician.
This unit requires a separate circuit serving only
this appliance.
8
230 V/208V
15 AMP
30 AMP
circuit
circuit
"tandem" type
"tandem" type

WINDOW REQUIREMENTS

Standard double-hung window with actual
opening width of 26" to 42".
bottom of sash to stool.
Install the air conditioner in a window where
there will be enough clearance around the cabinet
to allow ample circulation of air through the unit.
Note: All supporting parts should be secured to
firm wood, masonry or metal.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amd12Amh12

Table of Contents