GE AMD10 Use And Care & Installation Manual page 10

REMOVEFRONTGRILLE
See Front Grille section.
PREPARE CHASSIS.
1. Remove chassis locking bracket and chassis
locking screw with a Phillips head screwdriver.
(Save for reuse.)
2.
Remove ground screw and ground wire.
(Save for reuse.)
3.
Remove chassis from cabinet using the base pan
as a handle.
10
Chassis locking bracket
PREPARE CABINET
Room side +
Type D screw
1. Install top mounting rail onto top of cabinet
with 3 Type D screws.
Type D screw
2.
Install bottom sill channel onto cabinet by
inserting notches on channel into slots located
on bottom of cabinet and securing with 3 Type D
screws.
mounting rail
Type D
screw