Installing The Driver For The Pmc 8885E; Installing Drivers For Hyper-V Operating Systems; Installing The Driver For The Chipset; Installing Drivers For An Onboard Graphics Card - Lenovo ThinkServer RD650 Operating System Installation Manual

Installing the driver for the PMC 8885e

To install the driver for the PMC 8885e, do the following:
1. Download the corresponding driver from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the Device Manager window. Right-click RAID controller and then select Update Driver
Software.
4. In the Update Driver Software window, click Browse my computer for driver software.
5. In the "Browse for driver software on your computer" window, click Browse... to locate the driver you
want to install.
6. Click OK ➙ Next.
7. When the message "Windows has successfully updated your driver software" is displayed, click Close.

Installing drivers for Hyper-V operating systems

This topic provides instructions on installing drivers for Hyper-V operating systems.

Installing the driver for the chipset

To install the driver for the chipset, do the following:
1. Download the driver for the chipset from the Lenovo Web site. The most up-to-date device drivers for
various server models are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver to a USB storage device and then connect the USB storage device to your server.
3. Open the folder that contains the driver and double-click the setup file. The "Intel
Software Welcome" window is displayed.
4. Click Next. The License Agreement window is displayed.
5. Click Accept. The Readme File Information window is displayed.
6. Click Install. The Intel
7. Click Finish. The installation is completed.

Installing drivers for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Download the driver for an onboard graphics card from the Lenovo Web site. The most up-to-date
device drivers for various server models are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver to a USB storage device and then connect the USB storage device to your server.
3. When the "Welcome to the ..." window is displayed, click Next.
4. When the License Agreement window is displayed, click I accept the agreement, and then click Next.
5. When the Select Destination Location window is displayed, click Next.
6. When the message displays as "Ready to Install", click Install.
7. When the message displays as "Completing the ...", click Finish. It is recommended to restart your
server after the installation is completed.
104
ThinkServer RD650 and RD550 Operating System Installation Guide
.
®
Chipset Device Software Completion window is displayed.
.
®
Chipset Driver