Table of Contents
Advertisement
3
Press the AUTO to running program , the firmware be updated
as shown in Fig. 9~10.
4
Press the file --> exit to end program , as shown in Fig. 11.
ISP Instruction
If there is a warring message coming as shown in Fig 12. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 8
5 Check the firmware version
1). Turn off monitor.
Fig. 9
2).
[Push "AUTO" & "OK" buttons at the same time and hold them]
+[Press "power" button untill comes out "Windows screen" ]
=> then release all buttons.
3).Press "OK" button, choose"Factory" come on the OSD
menu.You will find, after upgrade, the version have already
changed from The former"HUDSON 200PW8 V0.003 2007-09-
13" to the Present "HUDSON 200PW8 V1.00 2007-11-08" as
shown in Fig. 13 and Fig. 14.
Fig. 10
Fig. 11
4) Turn off the monitor, exit the factory mode.
HUDSON 8
27
Fig. 12
Fig. 13
Fig. 14
Advertisement
Table of Contents
