Philips BRILLIANCE 200P3M User Manual

20-inch color lcd monitor

Advertisement

Quick Links

Philips 200P3M/200P3G Electronic User's Manual
file:///D|/K1/english/200p3mg/index.htm [1/3/2003 3:34:16 PM]

Advertisement

Table of Contents
loading

Summary of Contents for Philips BRILLIANCE 200P3M

  • Page 1 Philips 200P3M/200P3G Electronic User's Manual file:///D|/K1/english/200p3mg/index.htm [1/3/2003 3:34:16 PM]...
  • Page 2: Safety And Troubleshooting Information

    Read and follow these instructions when connecting and using your computer monitor: Unplug the monitor if you are not going to use it for an extensive period of time.
  • Page 3 Safety & Troubleshooting Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold. Avoid moving the LCD monitor between locations with large temperature differences. Choose a site that falls within the following temperature and humidity ranges. Temperature: 5-35°C 41-95°F Humidity: 20-80% RH Do not subject the LCD monitor to severe vibration or high impact conditions.
  • Page 4: About This Manual

    Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version.
  • Page 5 ©2002 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/K1/english/200p3mg/about/about.htm (2 of 2) [1/3/2003 3:34:24 PM]...
  • Page 6: Product Information

    200P3M/200P3G Product Information Product Information Product Features • Technical Specifications Defect Policy • Automatic Power Saving Product Views • Physical Function Product Features BRILLIANCE 200P3M/200P3G 20-inch color LCD monitor with excellent display performance Multiple video input allowing displaying of DVI-I digital/ analog, VGA analog, S-Video & CVBS Video inputs.
  • Page 7: Optical Characteristics

    200P3M/200P3G Product Information VIDEO • Video dot rate • Input impedance - Video - Sync • Input signal levels • Sync input signal • Sync polarities • S-Video • CVBS •Video interface AUDIO-IN • Input signal level • Headphone out signal level •...
  • Page 8: Resolution & Preset Modes

    200P3M/200P3G Product Information • Viewing Angle: (C/R>10) • Response time * This data is subject to change without notice. Resolution & Preset Modes 1600 x 1200 at 75Hz(analog input) • Maximum 1600 x 1200 at 60Hz(digtal input) • Recommended 1600 x 1200 at 60Hz...
  • Page 9: Automatic Power Saving

    200P3M/200P3G Product Information 91.1 75.0 93.8 Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
  • Page 10: Pin Assignment

    200P3M/200P3G Product Information • Temperature • Relative humidity • System MTBF • Cabinet color * This data is subject to change without notice. * Resolution 1600x1200, standard size, contrast max., brightness 50%, 9300° K, full white pattern, without audio/USB. Pin Assignment 1.
  • Page 11: Product Views

    200P3M/200P3G Product Information 2. The 15-pin D-sub connector (male) of the signal cable: Assignment Red video input Green video input/SOG Blue video input Sense (GND) Not connected Red video ground Green video ground Blue video ground Product Views Follow the links to see various views of the monitor and its components.
  • Page 12 200P3M/200P3G Product Information Tilt Swivel file:///D|/K1/english/200p3mg/product/product.htm (7 of 7) [1/3/2003 3:34:27 PM] RETURN TO TOP OF THE PAGE...
  • Page 13: Installing Your Lcd Monitor

    Installing your LCD Monitor Installing your LCD Monitor Your LCD Monitor : Front View Product Description monitor • VESA Standard Mounting Front View Product Description To switch monitor's power On and Off Power LED To access OSD menu To adjust the OSD To adjust brightness of the display To adjust the OSD To adjust speakers volume...
  • Page 14: Optimizing Performance

    Installing your LCD Monitor CVBS video input S-Video video input VGA input DVI-I input AC power in Mic out Audio in Audio L input Audio R input Optimizing Performance For best performance, ensure that your display settings are set at 1600x1200@60Hz file:///D|/K1/english/200p3mg/install/install.htm (2 of 3) [1/3/2003 3:34:30 PM] RETURN TO TOP OF THE PAGE...
  • Page 15 Installing your LCD Monitor Note: You can check the current display settings by pressing the "OK" button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. You can also install the Flat Panel Adjust (FP Adjust) performance out of your monitor.
  • Page 16: Description Of The On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance of the monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when the user is operating the monitor.
  • Page 17 On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. file:///D|/K1/english/200p3mg/osd/osddesc.htm (2 of 7) [1/3/2003 3:34:34 PM]...
  • Page 18 On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (3 of 7) [1/3/2003 3:34:34 PM]...
  • Page 19 On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (4 of 7) [1/3/2003 3:34:34 PM]...
  • Page 20 On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (5 of 7) [1/3/2003 3:34:34 PM]...
  • Page 21 On-Screen Display file:///D|/K1/english/200p3mg/osd/osddesc.htm (6 of 7) [1/3/2003 3:34:34 PM]...
  • Page 22 On-Screen Display RETURN TO TOP OF THE PAGE file:///D|/K1/english/200p3mg/osd/osddesc.htm (7 of 7) [1/3/2003 3:34:34 PM]...
  • Page 23: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...
  • Page 24 A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. D-SUB USB Your monitor comes with a D-Sub cable.
  • Page 25 Glossary Energy Star Computers Programme An energy conservation programme launched by the US Environmental Protection Agency (EPA) with the primary aim of promoting the manufacture and marketing of energy-efficient office automation equipment. Companies joining this programme must be willing to commit themselves to manufacturing one or more products capable of going into a low -power state (<...
  • Page 26 Glossary A Universal Serial Bus device that provides additional connections to the Universal Serial Bus. Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub. Hubs serve to simplify USB connectivity from the user's perspective and provide robustness at low cost and complexity.
  • Page 27 Glossary Upstream The direction of data flow towards the host. An upstream port is the port on a device electrically closest to the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic. Vertical refresh rate Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second.
  • Page 28: Download And Print

    Download and Print Download and Print Installing your LCD monitor driver Program Installing Your LCD monitor driver System requirements: PC running Windows 95, Windows 98, Windows 2000 , Windows Me, Windows XP or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ Read the "Driver_install02.txt"...
  • Page 29 180P2G.pdf Download 180P2B.pdf Download 200P3G.pdf Download 200P3M.pdf Download 200P3A.pdf Download 200P3C.pdf 2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source').
  • Page 30 Download and Print Installing FPadjust Program The FP Adjust program generates alignment patterns which will help you adjust monitor settings such as CONTRAST, BRIGHTNESS, HORIZONTAL & VERTICAL POSITION, PHASE and CLOCK. System requirements: PC running Windows 95, Windows 98, Windows 2000, Winodws Me, Windows XP or later To install FPadjust Program:...
  • Page 31: Faqs (Frequently Asked Questions)

    Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1600x1200@60Hz (20"). Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC What does "refresh rate"...
  • Page 32 FAQs (Frequently Asked Questions) Your video card/graphic driver and monitor together determine the available resolutions. You can select desired resolution under Window 95/98 with the "Display properties/Settings" control panel What if I get lost when making monitor adjustments? Simply press the OSD button, then select "Reset" to recall all original factory settings. What is the Auto function? The AUTO adjustment key restores optimal screen position, phase and clock settings with the press of a single button –...
  • Page 33: Screen Adjustments

    Yes, Philips Brilliance LCD monitors have this optional feature. The standard VESA mount holes on back cover that allows user to mount the Philips monitor on any VESA standard ARM or accessories. Touch panels are being developed for future applications. Check with your Philips sales representative for more information.
  • Page 34: Compatibility With Other Peripherals

    Can I connect my LCD monitor to any PC, workstation or Mac? Yes, all Philips LCD monitors are fully compatible with standard PC, Mac and workstation. You may need a cable adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for more information.
  • Page 35: Lcd Panel Technology

    FAQs (Frequently Asked Questions) LCD Panel Technology What is Liquid Crystal Display? A Liquid Crystal Display (LCD) is an optical device that is commonly used to display ASCII characters and images on digital items such as watches, calculators, portable game consoles etc. LCD is the technology used for displays in notebook and other small computers.
  • Page 36 FAQs (Frequently Asked Questions) How does a TFT LCD Panel work? On each column and row of the TFT LCD panel, a data source drive and a gate drive and attached respectively. The TFT drain of each cell is connected to the electrode. The molecular arrangement of liquid crystal elements differs depending on whether it is impressed with voltage or not.
  • Page 37: Ergonomics, Ecology, And Safety Standards

    UL Standards. Does the LCD monitor conform to general safety standards? Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 95-99 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment, and recyclability.
  • Page 38: Troubleshooting

    Information • Other Related Information This page presents problems that can be corrected by the user. If the problem still exists after these possible solutions, contact your nearest Philips dealer. Common Problems Having this problem? No Picture (Power LED not lit)
  • Page 39 The after-image will disappear after a set amount of time The remaining dots are normal characteristic of the liquid crystal used in today’s technology. Consumer Information Centers RETURN TO TOP OF THE PAGE list to contact your local Philips...
  • Page 40: Regulatory Information

    (1 of 14) [1/3/2003 3:34:55 PM] • CE Declaration of Conformity • EN 55022 Compliance (Czech Republic Only) • MIC Notice (South Korea Only) • Philips End-of-Life Disposal • Troubleshooting • Other Related Information • TCO '99 Information •...
  • Page 41 Regulatory Information What does labelling involve? This product meets the requirements for the TCO'95 scheme which provides for international and environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) and NUTEK (The National Board for Industrial and Technical Development in Sweden).
  • Page 42 Bio-accumulative is defined as substances which accumulate within living organisms Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative. TCO '99 Information (For 180P2M, 180P2B, 180B2S, 170B2M, 170B2B, 170B2Y, 170S2B, 200P3M) file:///D|/K1/english/200p3mg/safety/regs/regulat.htm (3 of 14) [1/3/2003 3:34:55 PM] RETURN TO TOP OF THE PAGE...
  • Page 43 Regulatory Information Congratulations! labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labeled computers? In many countries, environmental labeling has become an established method for encouraging the adaptation of goods and services to the environment.
  • Page 44 Regulatory Information Environmental Requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
  • Page 45: Ce Declaration Of Conformity

    Regulatory Information CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:1992+A1+A2+A3+A4+A11 (Safety requirement of Information Technology Equipment) - EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)
  • Page 46 THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. Commission Federale de la Communication (FCC Declaration) file:///D|/K1/english/200p3mg/safety/regs/regulat.htm (7 of 14) [1/3/2003 3:34:56 PM] ® PHILIPS artner, ® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE...
  • Page 47: Vcci Notice (Japan Only)

    Regulatory Information Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
  • Page 48 Regulatory Information Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. Class B ITE MIC Notice (South Korea Only) Class B Device Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas.
  • Page 49: Polish Center For Testing And Certification Notice

    Regulatory Information Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
  • Page 50 Regulatory Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
  • Page 51 Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
  • Page 52 Regulatory Information file:///D|/K1/english/200p3mg/safety/regs/regulat.htm (13 of 14) [1/3/2003 3:34:56 PM] of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
  • Page 53 Regulatory Information the lead - not simply over the three wires. RETURN TO TOP OF THE PAGE file:///D|/K1/english/200p3mg/safety/regs/regulat.htm (14 of 14) [1/3/2003 3:34:56 PM]...
  • Page 54: Other Related Information

    Other Related Information Other Related Information Safety and Troubleshooting for Users in the U. S. • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
  • Page 55: Philips Pixel Defect Policy

    TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
  • Page 56: Proximity Of Pixel Defects

    In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
  • Page 57 Philips Pixel Defect Policy Total bright dot defects of all types BLACK DOT DEFECTS MODEL 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Black dot defects within 20 mm circle* Total black dot defects of all types...
  • Page 58: Setting Up And Connecting Your Monitor

    Setting Up and Connecting Your monitor Setting up and Connecting Your monitor Your LCD Monitor : Front View Product Description connecting your monitor • Performance Accessory Pack Unpack all the parts. Power cord PC audio cable (lime) S-video cable Connect to PC Philiips has pre-connected VGA cable for the first installation.
  • Page 59 Setting Up and Connecting Your monitor Connect power cord, VGA, DVI, microphone and audio cables onto rear of monitor firmly If you use an Apple Macintosh special Mac adapter to one end of the monitor signal cable. file:///D|/K1/english/200p3mg/install/connect.htm (2 of 5) [1/3/2003 3:35:15 PM] , you need to connect the...
  • Page 60 Setting Up and Connecting Your monitor Connect the cables to the back of your computer by following steps Turn off your computer and unplug its power cord. Connect the VGA or DVI cable to video connector. Connect the microphone and audio cables. Plug the power cord of computer and monitor into a nearby outlet.
  • Page 61 Setting Up and Connecting Your monitor Connect to Microphone and Earphone file:///D|/K1/english/200p3mg/install/connect.htm (4 of 5) [1/3/2003 3:35:15 PM]...
  • Page 62 Setting Up and Connecting Your monitor RETURN TO TOP OF THE PAGE file:///D|/K1/english/200p3mg/install/connect.htm (5 of 5) [1/3/2003 3:35:15 PM]...
  • Page 63 VESA Standard Mounting VESA Standard Mounting Your LCD Monitor : Front View Product Description connecting your monitor • file:///D|/K1/english/200p3mg/install/base.htm (1 of 2) [1/3/2003 3:35:15 PM] Getting Started • Optimizing Performance 1)Put monitor face down on the safe surface. Unscrew the four screws of the base. •...
  • Page 64 VESA Standard Mounting file:///D|/K1/english/200p3mg/install/base.htm (2 of 2) [1/3/2003 3:35:15 PM] 3)Take off the mounting cover. 4)VESA mounting holes RETURN TO TOP OF THE PAGE...
  • Page 65: Getting Started

    The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows 95/98/2000/Me/XP. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows 95/98/2000/Me/XP and the Plug & Play application can be activated.
  • Page 66 Getting Started Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. Double click on the 'Display' Icon. Select the 'Settings' tab then click on 'Advanced...'. Select 'Monitor' button, then click on 'Change...' button. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk...'.
  • Page 67 Getting Started Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive). Click on the 'Open' button, then click the 'OK' button.
  • Page 68 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.
  • Page 69: Your International Guarantee

    12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.
  • Page 70 Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local...
  • Page 71 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 72 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.
  • Page 73: F1Rst Choice Contact Information

    F1rst Choice Contact Information F1rst Choice Contact Information Telephone numbers: 01 546 575 603 Austria 02 275 0701 Belgium 800 92256 Cyprus (Greek) 35 25 87 61 Denmark 03 8717 0033 France 0696 698 4712 Germany 00800 3122 1223 Greece 09 2290 1908 Finland 01 601 1161...
  • Page 74: Consumer Information Centers

    Philips Representation Office Ul. Usacheva 35a 119048 Moscow Phone: 095-937 9300 Fax : 095-755 6923 TURKEY Türk Philips Ticaret A.S. Talatpasa Caddesi No 5. 80640-Gültepe/Istanbul Phone: (0800)-211 40 36 Fax : (0212)-281 1809 Latin America file:///D|/K1/english/warranty/warcic.htm (1 of 8) [1/3/2003 3:35:56 PM] Bangladesh •...
  • Page 75 ARGENTINA Philips Antillana N.V. Vedia 3892 Capital Federal CP: 1430 Buenos Aires Phone: (011)-4544 2047 BRASIL Philips da Amazônia Ind. Elet. Ltda. Av. Luis Carlos Berrini, 1400 - Sao Paulo -SP Phone: 0800-701 CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O.
  • Page 76 Consumer Information Centers PARAGUAY Philips del Paraguay S.A. Avenida Artigas 1513 Casilla de Correos 605 Asuncion Phone: (021)-211666 Fax : (021)-213007 PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Ind.Philips del Uruguay S.A.
  • Page 77 Consumer Information Centers NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (toll free) Fax : 0800 288 588 (toll free) Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam...
  • Page 78 Madras 600 006 NEW DELHI Customer Relation Centre 68, Shivaji Marg New Dehli 110 015 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta / 798 4255 ext: 1612 Phone: (021)-794 0040 Fax : (021)-794 7511 / 794 7539...
  • Page 79 Fax : (021)-7721167 PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-888 05 72 Domestic toll free: 1-800-10-PHILIPS or 1-800-10-744 5477 Fax : (02)-888 05 71 file:///D|/K1/english/warranty/warcic.htm (6 of 8) [1/3/2003 3:35:56 PM]...
  • Page 80 Consumer Information Centers SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh., P.O. box 340 Singapore 1231 Phone: 6882 3999 Fax : 6250 8037 TAIWAN Philips Taiwan Ltd. Consumer Information Centre 26F, 66, Chung-Hsiao W. Road Sec. 1...
  • Page 81 Consumer Information Centers DUBAI Philips Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-335 3666 Fax : (04)-335 3999 EGYPT Philips Egypt Consumer Information Centre 10, Abdel Rahman El Rafei Mohandessin - Cairo, P.O.Box 242 DOKKI Phone: (02)-3313993 Fax : (02)-3492142 file:///D|/K1/english/warranty/warcic.htm (8 of 8) [1/3/2003 3:35:56 PM]...

Table of Contents