Table of Contents
Advertisement
GENERAL PRODUCT SPECIFICATION(Continued)
3.14
Smart image
3.14.1 Smart Image OSD outlook
3.14.1.1
Position
Pressing the "Smart Image" button, the position is in the bottom center of the screen.
3.14.1.2
Smart Image Logo & Banner
As design to keep the LightFrame logo at header but change the name to "SmartImage" with bitmap
format.
3.14.1.3
Icon of each profile
Each profile will use text instead of icon & text before.
3.14.1.4
User Operation Procedure
A.
5 different modes are switched to next in the sequence from 1 to 5 then back to 1 while pressing
this button: 1) Office Work 2) Image Viewing 3) Entertainment 4) Economic 5) Off. The default
setting is "Off".
B.
The FOS optimization will be changed in real time by which profile to be scrolled, users don' t need
to confirm to enable.
C.
The Smart Image OSD will remain on screen for 5 seconds after user last action. Or user can also
press [MENU] to close the Smart Image OSD immediately.
D.
Except using [MENU] button to scroll down profile. If Smart Image OSD already launched
onscreen. User is allowed to use up/down key to choose profile and press [MENU] to confirm
selection and close the Smart Image OSD.
E.
If the model has multiple inputs including VGA and DVI, each input has their own set of profiles.
When user switch input, the profile to be applied will also change.
F.
Each input can memorize their individual "Smart Image" profile status.
For example, Smart Image is on with "Office" profile at VGA input, when switch to DVI input, the
Smart Image will revert to previous profile of DVI.
In the input switching process the "Smart Image" OSD will also show up to present which profile
is selected if "Smart Image" is enabled at that input.
The Smart Image status will also be stored after the monitor is resumed from AC on/off or power
switch on/off.
3.14.1.5
Linkage between Smart Image OSD and main OSD
A. Settings within main OSD have linkage with Smart Image OSD.
i. Brightness
ii. Contrast
iii.Color Temperature
B. Because each preset profiles will define default setting of these 3 parameters. Users can
understand what is the value of that in preset profile by open the main OSD.
C. When any SmartImage Lite profile had been enabled. The parameters in main OSD are still
available for user to adjust. But these adjustments are temporary only. If users switch to
another profile and then go back. The setting in main OSD will show preset values of that
SmartImage profile enabled.
3.14.1.6
Profile Definitions (system integrators to input at design stages)
A.
Office Work
20 inch LCD Monitor
TYPE
BRAND : PHILIPS
2007-11-23
:200PW8
2007-11-23
590
7
HUDSON 8
59
Advertisement
Table of Contents
