Table of Contents
Advertisement
Front Control
To Lock/Unlock OSD FUNCTION(User Mode)
The OSD function can be locked by pressing"MENU"button for more
than 10 seconds, the screen shows following windows for 4 seconds.
Everytime when you press"MENU" button, this message
appears on the screen automatically.
Unlock OSD function
Unlocked OSD function can be released by pressing "MENU" button for
more than 10 seconds again.
Access Aging Mode
Step 1 : D
isconnect Interface Cable between Monitor and PC.
Step 2 :
Turn off LCD monitor.Then
at the same time and hold them]+[Press power "
out " AGING screen"] => then release all buttons.
Bring up:
After 15 seconds,
bring up:
Lock/Unlock,Aging,Factory Mode
[Push "AUTO" & " MENU " buttons
" button untill comes
AGING...
After 15 seconds,
bring up:
After 15 seconds,
bring up:
----------
----------
repeatly
Connect Signal cable again=> go back to normal display
Access Factory Mode
1). Turn off monitor.
2).
[Push "AUTO" & "MENU" buttons at the same time and hold them]
+[Press "power" button untill comes out "Windows screen" ]
=> then release all buttons
3).Press "MENU" button, wait until the OSD menu with
Characters "Factory" (below OSD menu) come on the Screen of
the monitor.
Enter Factory Menu
Step1:Press
"MENU"
button.
Step2:Choose Picture .
"
"
Step3:Press
"
"
button and choose factory .
Step4:Press
"MENU"
button.
HUDSON 8
AGING...
Factory Mode indicator
"
"
11
Advertisement
Table of Contents
