Table of Contents
Advertisement
4
HUDSON 8
Front View
I
To switch monitor's power On and Off
1.
To access OSD menu
2.
MENU/
OK
3.
To adjust the OSD
4.
To adjust brightness of the display
5.
Automatically adjust the horizontal position, vertical position,
AUTO/
phase and clock settings / Return to previous OSD level.
6. INPUT To change the signal input source.
There are five modes to be selected: Office Work,
7.
Image Viewing, Entertainment, Economy, and Off.
Rear View
1
Kensington anti-thief lock
2
VGA input
3
AC power input
4
DVI-D input (Available for selected countries)
5
USB upstream port
Accessory Pack
Item
Installation
Description
Power cord
VGA signal cable
Connecting to Your PC
1)
Connect the power cord and DVI cable to the back of the
monitor firmly. (Philips has pre-connected VGA cable for the
first installation.)
2)
Connect the cables to the back of your computer by following
these steps:
(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on
the back of your computer.
(c) Plug the power cord on your computer and your monitor into
a nearby outlet.
(d) USB plug
(1) Connect USB upstream port on monitor and the USB port on
PC with a USB cable.
(2) The USB downstream port is now ready for any USB device
to plug in
(e) Turn on your computer and monitor. If the monitor displays an
image, installation is complete.
Note: The USB plug is a pass through connection whether it can
support USB 1.1 or USB 2.0 depends on your PC's specification.
The Base
1)
Place the monitor face down on a smooth surface taking care to
avoid scratching or damaging the screen.
USB Cable
EDFU pack
Advertisement
Table of Contents
