Bluetooth Setup - AT&T TL92220 Quick Start Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must
first pair and connect your Bluetooth cellular phone with the telephone base.
All TL92220/TL92270/TL92320/TL92370/TL92420/TL92470 handsets
can be used to make or answer on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 0 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 5 feet of the telephone base for optimal
performance.
Pairing a cell phone
Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user's manual to learn how to search for or
add new Bluetooth devices.
To pair and connect a cell phone:
. Press MENU/
main menu.
2. Press CID
/SELECT.
MENU
. Press CID
/SELECT. The screen displays
press
MENU
ADD CELLULAR Place cell phone next to base. Press
SELECT.
• If there are already four devices on the paired
devices list, the screen displays Maximum of 4
devices can be paired and prompts you to replace
an existing paired device (page ).
/SELECT. The screen displays
4. Press
MENU
Please set your cell phone to search for devices,
then press SELECT.
• If a device is already connected to the telephone
base, the screen displays Connected device will
be temporarily disconnected. Press SELECT. Press
/SELECT to temporarily disconnect the device
MENU
and continue the pairing process.
5. Turn on the Bluetooth feature of your cell phone and search for or add
new devices.
6. Press /SELECT to set the telephone base to discoverable mode.
MENU
. Once your cell phone finds AT&T DECT 6.0, press
in idle mode to enter the
SELECT
or DIR to highlight Bluetooth, then press
or DIR to highlight Add cellular, then
6
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cel lular
Add headset
Active devices
ADD CELLULAR
Place cel l
phone next to
base.
Press SELECT
Please set your
cel l phone to
search for
devices, then
press SELECT
/SELECT.
MENU