AT&T TL92220 Quick Start Manual page 14

Bluetooth
Bluetooth setup
Replace an active device
You can replace an active device with a device on the paired devices list even
if you already have two devices on the active devices list.
To replace an active device:
. Press MENU/
CID
2. Press or
/SELECT.
MENU
CID
. Press or
press /SELECT.
MENU
CID
4. Press or
/SELECT.
MENU
5. Press /SELECT again to select Connect.
MENU
• When you already have two cell phones on the active
devices list, the handset shows Maximum of 2 devices
can be connected and then Replace an existing
active device with cellular? Press SELECT.
• When you already have one headset on the active
devices list, the handset shows Only 1 headset can be
connected and then Headset A will be replaced from
Active list? Press SELECT.
6. Press /SELECT. You are prompted to select a device
MENU
on the paired devices list.
. Press CID or
replaced, then press
Device removed from active list and then Connecting
Cell Phone A to the base...
. Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm the
connection. When you successfully replace and connect
an active device with a paired device, the handset
displays Device connected.
on the handset when it is not in use.
SELECT
DIR to highlight Bluetooth, then press
DIR to highlight Paired devices, then
DIR to highlight a device, then press
DIR to highlight the device to be
/SELECT. The handset displays
MENU

BLUETOOTH
Add cel lular
Add headset
Active devices
Paired devices
SELECT DEVICE
1 Cel l Phone A
2 Cel l Phone B
Connect
Rename
Remove paired
Replace an
existing active
device with
cel lular?
Press SELECT
REPLACE DEVICE
1 Headset A
2 Cel l Phone BC
Device removed
from active
devices list
Connecting
Cel l Phone A
to the base...
Device
connected