Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our...
Achieving the Best Performance To achieve the best performance: Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) ...
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview The Yarden 6-OD is a high performance on-wall speaker that can be mounted on the wall vertically or horizontally. The mounting bracket is made of painted steel that can be attached to the speaker, letting you rotate it to the left or right.
“Mono” setup (once the selector switch is set to MONO). One +, - pair for the input (see Section 4.4) Figure 2 shows the Yarden 6-OD in a stereo setup: Figure 2: Yarden 6-OD Stereo Setup Yarden 6-OD - Overview...
Negative right terminal on the receiver into the negative terminal block of the speaker Positive right terminal on the receiver into the positive terminal block of the speaker Yarden 6-OD - Installing the Yarden 6-OD...
(see Figure Figure 4: Yarden 6-OD with Bracket Connected 5. Slide the mounting bracket over the mounting screws so that the mounting bracket is secured to the surface.
Setting up an Array Installation When installing Yarden 6-OD in an array installation layout you need to define the distance between speakers as well as the layout pattern (square or hexagonal). The distance between speakers is set according to the uniformity of the coverage desired and the budget.
Figure 7 shows an example of parallel wiring in a square array installation: Figure 7: Square Layout Parallel Wiring Yarden 6-OD - Installing the Yarden 6-OD...
Connecting the Yarden 6-OD You can connect the Yarden 6-OD speaker to an amplifier, for example the Kramer 907xl Power Amplifier/Mixer, as illustrated in Figure Figure 8: Yarden 6-OD Installed Yarden 6-OD - Installing the Yarden 6-OD...
Back panel to wall (with mounting bracket): 3.8cm (1.5”) ACCESSORIES: mounting bracket (including 2 knobs and 2 mounting screws) COLORS: Available in white and black Specifications are within a 10% tolerance and are subject to change without notice at http://www.kramerelectronics.com Yarden 6-OD - Technical Specifications...
Page 18
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the YARDEN 6-OD and is the answer not in the manual?
Questions and answers