Operation (V1 Models); Operation (V3 Models) - Elan HC-600 ODG V1 User Manual

5) OPERATION (for V1 models only, for V3 models jump forward to page 8)
Grinding coffee with HC-600 On Demand Grinder:
Continues mode selector
Single cup mode selector
Double cup mode selector
Programming dial
Before start grinding coffee please spend some few minutes to learn and understand the concept of the
HC-600 ODG controller (fig. 5.1.)
Modes of operation:
The HC-600 ODG can be operated in 3 different modes. Activating (or deactivating) each one of the modes,
is achieved by single pressing on the relative mode selector button. Once activated, a green LED will turn to
ON state on each one of the selectors.
Continues mode, while in continues mode pressing longer than 3 sec on continues-mode button
•
will start the grinder (The relative LED will blink as long as the grinder is running) stopping the
grinder by another short press on continues-mode button.
Single cup mode, while in single cup mode any press on the demand switch (fig 5.2) will activate
•
the grinder to grind a precisely timed dose (time can be programmed by user) into the filter
handle.
Double cup mode, while in double cup mode any press on the demand switch (fig 5.2) will
•
activate the grinder to grind a precisely timed dose (time can be programmed by user) into the
filter handle.
Remark: Stopping an undesired grinding operation (before reaching complete dose) by pressing continues
mode button.
Demand switch
Fig 5.2
©ELAN (Changzhou) Hardware Co. Ltd.
Version 2.1, September 2012
Fig 5.1
6
LCD display
Counter selector button