Elan HC-600 ODG V1 User Manual page 8

(V3 ONLY)
5) OPERATION (for V3 models only)
Grinding coffee with HC-600 On Demand Grinder:
Continues mode selector
Power indicator
Modes of operation:
The HC-600 ODG V3 grinder is installed with a simple operating main switch consisting of 2 running
modes. (fig. 5.1 A)
Continues mode, while selecting the ON position, the grinder will run and grind coffee
•
continuously up until the user will switch main switch back to Off position.
Dosing mode, while selecting the Auto position, the grinder will run together with the demand
•
switch and as long as it pressed.
Grinding in continues mode:
The HC-600 ODG is designed to grind continuously into bags or any other collecting tool. Nevertheless this
machine was not designed as a pure "bags grinder". We suggest:
In continues mode do not grind more than 10kg (20 pounds) of coffee per day.
•
Grind in intervals of not more than 1 kg (2 pounds) per hour.
•
When grinding in continues mode, keep the powder outlet top cover open and shake
•
the bag from time to time. View the free flow of coffee to avoid back logging of the
powder into the grinding chamber. In that case, stop the grinding, use the provided
brush to evacuate the clogged powder into the bag and resume grinding.
(V3 ONLY)
Operating intervals:
It is a normal occurrence that during long grinding periods the grinding chamber will heat up. In order to
•
achieve best grinding results, it is recommended to grind coffee in short intervals of a few minutes each.
Adjusting coffee grind
The grinding blades' distance was factory pre adjusted to satisfy different common coffee grinds (from super
•
fine to coarse) corresponding gap distance from 0.05mm to 0.5mm.
Turning the grinding dial incrementally counterclockwise will make the grind finer and turning it clockwise will
•
make the grind coarser.
Grind a small amount of coffee and test its coarseness with your espresso machine.
•
As coffee beans' qualities and characteristics are changing from time to time it is recommended repeating this
•
adjustment once in a while.
©ELAN (Changzhou) Hardware Co. Ltd.
Version 2.1, September 2012
Off
Fig 5.1 A
Fig6.1
8
Automatic mode