Related Manuals for Elan HC-880
Summary of Contents for Elan HC-880
- Page 1 HC‐880 – Manual book HC-880 Coffee Grinder OPERATING & SERVICE MANUAL ELAN (Shanghai) Industry and Trading CO.,LTD. Page 1 of 12 2011.05 Ver.1.2...
- Page 2 If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Warranty Information The manufacturer provides warranty in accordance with the legislation of the customer's own country of residence, with a minimum of 1 year (Germany: 2 years), starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. The repairs under warranty may only be carried out by an authorized service center. When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of: • Normal wear and tear • Incorrect use, e.g. Overloading of the appliance, use of non‐approved accessories • Use of force, damage caused by external influences • Damage caused by non‐observance of the user manual, e.g. Connection to an unsuitable mains supply or non‐compliance with the installation instructions • Partially or completely dismantled appliances ELAN (Shanghai) Industry and Trading CO.,LTD. Page 2 of 12 2011.05 Ver.1.2...
-
Page 3: Table Of Contents
HC‐880 – Manual book TABLE of CONTENTS 1) Preface………………………………………………………………….4. 2) Technical Specifications..........4. 3) General Description………………………………………………5. 4) Unpacking and installation……………………………………5. 5) Operation……………………………………………………………..6. 6) Safety devices……………………………………………………….8. 7) Safety instructions………………………………………………..8. 8) Maintenance and service………………………………………9. 9) Cleaning………………………………………………………………..9. ELAN (Shanghai) Industry and Trading CO.,LTD. Page 3 of 12 2011.05 Ver.1.2... -
Page 4: Preface
1) PREFACE Congratulations for purchasing the HC‐880 grocery grinder. The HC‐880 is a commercial appliance to be used in groceries coffee shops, coffee roasters, espresso bars, hotels and restaurants. HC‐880 will grind whole been coffee and fill up coffee bags with variable, user‐ selectable (from super fine to course) coffee powder. Read this manual from cover to cover before using the appliance as it contains important instructions for the safety, operation, and maintenance of the appliance. Keep the manual in a safe place for future use and reference. This manual book and additional technical support can be downloaded at HeyCafé’s web site: www.heycafe.com The manufacturer reserves the right to modify the appliance and the manual accordingly. 2) TECHNICAL SPECIFICATIONS of HC880 Dimensions: Height: 615mm, Width: 180mm, Length: 390mm Weight: 21Kg Burrs diameter: 84mm Basic hopper’s capacity: 600 gr. Coffee beans Hopper’s extension: 1300gr Electrical Specifications: USA: 110V/60Hz Europe: 230V/50Hz Max Current consumption: 3.0A Grinding capacities: 13‐16 Kg/hour ELAN (Shanghai) Industry and Trading CO.,LTD. Page 4 of 12 2011.05 Ver.1.2... -
Page 5: General Description
5. Open the grinder’s coffee residue tray to the desired opening distance by pulling tray’s locking knob. 6. Before plugging in the electrical cord, make sure: a) The appliance voltage and frequency rating (according to the back side label) is the same as the supply mains. b) The wall socket is fitted with an efficient ground contact. c) DO NOT plug the appliance into the supply mains if a ground system is not available in mains socket, and was not positively checked to be in compliance with national/local electrical codes. d) IT IS COMPULSORY TO GROUND THE APPLIANCE. e) The manufacturer cannot be held responsible in the event that this regulation is not complied with. f) The power consumption of the appliance (according to the back side label) is consistent with the relevant wall socket capacity. g) The wall socket is protected against short‐outs and power surges. h) Do not use extension cables, plug adapters for multiple sockets, or makeshift connections. 7. Plug in the appliance. ELAN (Shanghai) Industry and Trading CO.,LTD. Page 5 of 12 2011.05 Ver.1.2... -
Page 6: Operation
6. Repeat step 5 and this time change the grinding selection step by step till reaching finest position. Repeat it for several times. Observe and listen to the HC880 grinder. For any abnormal or excessive noise refer to your local dealer. GRINDING COFFEE: 1. Plug the electrical wire into wall socket. 2. Pure the desired amount of beans into the hopper (for quantities of 600gr use the hopper extension), after doing so, completely close hopper lid. 3. Select the desired grinding program on the grinding knob. 4. Slip an empty bag under the powder chute and rest it freely on residue tray (make sure the bag is placed higher than the bag presence switch). 5. Press main switch from Off to ON and then to Run (the switch return to ON position by itself). 6. While grinding pull and release grinding cleaning knob 2‐3 times per minute. 7. When grinding is completed, switch the main switch to OFF position or simply pull out the coffee bag, both actions will stop grinding operation. Operation intervals: It is a normal occurrence that during long grinding periods the grinding chamber will heat up. In order to achieve best grinding results, it is recommended to grind coffee in short intervals of no longer than 10 minutes grinding per period of 15‐20 minutes. ELAN (Shanghai) Industry and Trading CO.,LTD. Page 6 of 12 2011.05 Ver.1.2... - Page 7 6. Use crossed screw driver to release the knob’s main screw, and pull out the knob. 7. The brass internal knob will be exposed. 8. Observe the current position of line mark on internal knob relatively to the line marks on grinding cover. (possibly use a marker to mark this position on the grinder’s cover) 9. Turn ON the grinder, then: a. If the grinder was squeaking on Turkish coffee position, turn the internal knob 1‐2 notches to the left (CCW) and until noise level of operation is regular. b. If you feel that the grinding is not fine enough on Turkish coffee position, then rotate the internal knob 1‐2 notches to the right (CW) and continue rotating (CW) until you hear the metal to metal squeaking noise then open again (CCW) until it is silent again. 10. REMARK: if from squeaking position to silent area requires more than 4 notches on the internal knob it means the machine need to be examined by a technician. Call your technician and do not continue and operate the grinder until it is thoroughly examined. 11. Turn OFF the grinder, re‐assemble the knob on Turkish coffee position, tighten the screw and place the Logo cover back into its position. 12. Check the grinder by grinding coffee beans to various types of coffee powder and repeat the entire process if necessary. ELAN (Shanghai) Industry and Trading CO.,LTD. Page 7 of 12 2011.05 Ver.1.2...
-
Page 8: Safety Devices
1. NEVER OPERATE THE GRINDER IF THE BEAN HOPPER IS NOT FULLY SECURED TO THE GRINDER’S BODY. BEFORE REMOVING THE HOPPER FOR ANY REASON MAKE SURE TO DISCONNECT THE POWER SUPPLY. 2. NEVER CLEAR FOREIGN OBJECTS FROM THE BEANS CONVEYOR OR BEANS HOPPER WHEN THE APPLIANCE IS PLUGGED INTO A POWER SOCKET. 3. BEFORE ANY MAINTENANCE, EVEN FOR CLEANING, ALWAYS DISCONNECT THE POWER SUPPLY. 4. Never attempt to insert your fingers or any foreign objects into the grinding chamber or blades. 5. Be aware that grinding blades continue rotating for a short while after switching OFF the appliance and the grinding operation has ended. 6. In the event that the appliance has a malfunction or the blades need to be replaced, do not attempt to service the appliance by yourself. 7. Do not change or tamper with the appliance. 8. Do not use the appliance barefoot or if your hands or feet are damp. 9. Do not use the cable wire to pull and disconnect the power plug. 10. Always keep the appliance dry (internally and externally). 11. Never put grinded coffee into the hopper. 12. Never attempt grinding anything else other than coffee beans. ELAN (Shanghai) Industry and Trading CO.,LTD. Page 8 of 12 2011.05 Ver.1.2... -
Page 9: Maintenance And Service
4. Before reinstalling the beans hopper back to its position, make sure it is dried thoroughly. Cleaning the grinding chamber Before starting the thorough cleaning procedure of the HC880 you should read the complete set of instructions and understand it completely. 1. Place an empty bag or box under the powder chute (make sure to activate the bag switch). 2. Empty the machine completely by grinding any coffee beans left‐over and by pulling and releasing the cleaning lever for several times while changing the dial position from end to end few times until no more powder is coming out. 3. Position the grinding dial knob on Turkish coffee and turn off the Grinder. 4. Using flat screw driver remove the logo sign of the grinding knob. 5. Use crossed screw driver to release the knob’s main screw, and pull out the knob. 6. The internal knob will be exposed, observe and memorize the current position of line mark on internal knob relatively to the line marks on grinding cover. 7. Use a cross screw driver to release the 4 screws that secure the grinding front cover. 8. Pull out the entire front cover. It is the grinding front cover, grinding house and shafts. ELAN (Shanghai) Industry and Trading CO.,LTD. Page 9 of 12 2011.05 Ver.1.2... - Page 10 11. Clean the exposed grinding area. 12. Before re‐assembling the parts lightly grease the motor shaft with food grade grease. 13. Make your assembly way back in opposite order (steps 9‐5) 14. Before assembly the main knob check and if necessary recalibrate appliance’s tuning (refer to ADJUSTMENTS OF GRINDING OPERATION, pg. 7) 15. After all cleaning and replacing tasks are through make sure to assemble all of the parts and safety screws the same way as they were disconnected. If anything does not fit back together or there are left over parts, do not attempt to operate the appliance, call for the assistance of your technician. Start working gradually and observe any irregular noise or behavior of the appliance. 16. Advise with your local technical support for any irregular noise or grinding problems. If a more thorough cleaning is required, then the operation must be performed by a skilled technician. To ensure long lasting grinder and great fresh taste of coffee, the cleaning procedure as described above should be repeated routinely and at least once per month or as necessary according the grinder’s usage and quality of beans. END ELAN (Shanghai) Industry and Trading CO.,LTD. Page 10 of 12 2011.05 Ver.1.2...
- Page 11 HC‐880 – Manual book Add your remarks here: date Event remark ELAN (Shanghai) Industry and Trading CO.,LTD. Page 11 of 12 2011.05 Ver.1.2...
- Page 12 HC‐880 – Manual book Important details and telephone numbers: Local dealer address:________________________________________________________________ Telephone number:____________________ Fax number:_______________________ Technician mobile number:____________________ name:__________________ Coffee beans supplier details:__________________________________________________________ Telephone number:____________________ Fax number:_______________________ ELAN (Shanghai) Industry and Trading CO.,LTD. Page 12 of 12 2011.05 Ver.1.2...