Elan HC-600 ODG V1 User Manual page 13

Cleaning the grinding chamber grinding parts and powder outlet housing
Follow the instruction below for grinding chamber and grinding parts cleaning:
STEP1
By using a screw driver take
out the dial's safety screw.
Rotate the grinding dial clock
wise to take it off.
Pull out the upper blade
holder; make sure not to lose
the upper blade three
supporting springs.
Use a brush, a dry cloth, and a
vacuum cleaner to clean the
grinding chamber thoroughly
Use a brush, a dry cloth, and a
vacuum cleaner to clean the
upper and lower blade
thoroughly.
©ELAN (Changzhou) Hardware Co. Ltd.
Version 2.1, September 2012
STEP 2
STEP 3
STEP 4
13