6) Accessories
1. Porte filter holder accessory (for models sold after August 2009).
1. Notice the two holes under the filter fork support (fig 1-1)
2. Unpack the accessory (fig 1-2), which is packed separately within the grinder packaging.
3. Insert the accessory into the 2 holes (fig 1-3)
4. Place your filter supported by the fingers and the back accessory. (fig 1-4)
©ELAN (Changzhou) Hardware Co. Ltd.
Version 2.1, September 2012
Fig-1-1
Fig-1-3
Fig-1-2
Fig-1-4
9