Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Elan HC-600 ODG V1
Summary of Contents for Elan HC-600 ODG V1
- Page 1 ODG V1 / V3 Model ON DEMAND COFFEE GRINDER Designed in EU. Produced in China by Elan (Changzhou) Hardware Co. Ltd Building #6, #2 Tenglong Rd, Wujin Economic Development Zone, Jiangsu, 213161 China ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...
-
Page 2: Warranty Information
Damage caused by nonobservance of the user manual, e.g. connection to a nun suitable mains supply or non compliance with the installation instructions Partially or completely dismantled appliances ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... -
Page 3: Table Of Contents
4) Unpacking and installation ……………..…………………………………………………..5. 5) Operation (V1 models) ………………………………………..………………………………6. 6) Operation (V3 models) ……………………………………..…………………………………8. 7) Accessories…………………………………………………….…………………………………10. 8) Safety devices………………………………………………..………………………………….12. 9) Safety instructions………………………………………………………………………….….12. 10) Maintenance and service………………………………….……….…………………….13. 11) Cleaning………………….……………………………………………………….……………….13. 10)Remarks and important details….……………….…………………….……………….16. ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... -
Page 4: Preface
Bean hopper Powder outlet Hopper Safety screw Espresso filter handle support Grinding dial Program dial (V1) Grinder body LCD display and counter mode selector (V1) Residue tray Working mode selector (V1) ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... -
Page 5: Unpacking And Installation
ON for a short while. Should the rotation direction be wrong, do not use the appliance and contact your local dealer for further • instructions. ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... -
Page 6: Operation (V1 Models)
(time can be programmed by user) into the filter handle. Remark: Stopping an undesired grinding operation (before reaching complete dose) by pressing continues mode button. Demand switch Fig 5.2 ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... - Page 7 3 sec. 3. The grinder will turn on and the LED will start blinking. Stop the grinding by another short press on continues mode button. Fig. 5.3 fig 5.4 ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...
- Page 8 Grind a small amount of coffee and test its coarseness with your espresso machine. • As coffee beans’ qualities and characteristics are changing from time to time it is recommended repeating this • adjustment once in a while. Fig6.1 ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...
-
Page 9: Accessories
2. Unpack the accessory (fig 1-2), which is packed separately within the grinder packaging. 3. Insert the accessory into the 2 holes (fig 1-3) Fig-1-3 Fig-1-4 4. Place your filter supported by the fingers and the back accessory. (fig 1-4) ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... - Page 10 2. Unpack the accessory (fig 1-2), which is packed separately within the grinder packaging. 3. Use the accessory’s 2 ears in order to half turn and assemble it onto the 2 pins on the powder outlet port (fig 1-3) Fig-1-3 Fig-1-4 ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...
-
Page 11: Safety Devices
Do not use the cable wire to pull and disconnect the power plug. • Always keep the appliance dry (internally and externally). • Never re grinds grinded coffee. • Never attempt grinding anything else other than coffee beans. • ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... -
Page 12: Maintenance And Service
In order to ensure perfect attachment of the outlet chute, make sure to clean any powder’s leftovers from the • outlet chute housing it is magnet slots and bottom holder. (Fig 10.3) Fig 10.1 Fig 10.2 Fig 10.3 ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012... - Page 13 Use a brush, a dry cloth, and a vacuum cleaner to clean the grinding chamber thoroughly STEP 4 Use a brush, a dry cloth, and a vacuum cleaner to clean the upper and lower blade thoroughly. ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...
- Page 14 To ensure long lasting grinder and great fresh taste of coffee, the cleaning procedure as described above should be repeated periodically and at least once per month or as necessary according the grinder’s usage and quality of beans. ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...
-
Page 15: Elan (Changzhou) Hardware Co. Ltd
Add your remarks here Date Event Remark Purchasing Important details and telephone numbers: Local dealer Address: ________________________________________________________________ Telephone number: ____________________Fax number:_______________________ Technician mobile number: ____________________name: __________________ Coffee beans supplier details:_________________________________________________________________ Telephone number: ____________________Fax number:_______________________ ©ELAN (Changzhou) Hardware Co. Ltd. Version 2.1, September 2012...