Elan HC-600 ODG V1 User Manual page 7

Dose counting LCD:
The HC-600 ODG model is equipped with 3 independent dosing counters.
•
In order to view each one of the counters a single press on the counter selector will flip the LCD to
•
the next counter and the relative counter's LED will turn on.
2 of the counters are resettable (middle and left most LED); in order to reset each of these 2
•
counters a 5 sec continues press on the counter selector will zero the relative counter.
On single cup mode each coffee demand will increase the counting on all the 3 counters in 1.
•
On double cup mode each coffee demand will increase the counting on all 3 counters in 2.
•
On continues mode the counters are not counting.
•
Programming grinding time for single and double cup mode:
The HC-600 ODG is factory set with time values for single and double dose grinding periods. These pre set
values are obviously estimated and user should find his own times according the coffee grinding request. In
general as the coarseness of grind is coarser the time required to grind same weight of coffee is
shorter. Additionally different type of coffee blends and coffee shops are requiring different dose size for
their single and double cups (6.5gr to 9.5gr per single cup and 11gr to 18gr for double cup). The HC-600 ODG
is supporting the need of the user to change grinding time setting frequently.
In order to change time setting of single cup or double cup mode please follow these steps:
1. Press the desired mode selector button continuously for longer than 3 sec. when in programming
mode the mode selector's LED is blinking.
2. Watch the LCD display is now showing your current set up time (in seconds and tents of seconds).
3. In order to increase or decrease set up time simply rotate the peripheral scale of the knob and watch
the time set up on the LCD is changing up or down according direction of rotation.
4. When reaching the desired time value press shortly the mode selector button to return to normal
working mode (watch the display is returning to counter mode)
Grinding in continues mode:
The HC-600 ODG is designed to grind continuously into bags or any other collecting tool. Nevertheless this
machine was not designed as a pure "bags grinder". We suggest:
In continues mode do not grind more than 10kg (20 pounds) of coffee per day.
•
Grind in intervals of not more than 1 kg (2 pounds) per hour.
•
When grinding in continues mode, keep the powder outlet top cover open and shake
•
the bag from time to time. View the free flow of coffee to avoid back logging of the
powder into the grinding chamber. In that case, stop the grinding, use the provided
brush to evacuate the clogged powder into the bag and resume grinding.
1. Select continues mode button (continues mode LED is turned on)
2. If you wish to grind into a collecting tool or bag unscrew the fork legs (fig 5.3) and place the
collecting tool under the outlet port (fig 5.4). To start grinding press the continues mode button for
longer than 3 sec.
3. The grinder will turn on and the LED will start blinking. Stop the grinding by another short press on
continues mode button.
©ELAN (Changzhou) Hardware Co. Ltd.
Version 2.1, September 2012
Fig. 5.3
7
fig 5.4